You are here
Home > Featured > What Are The Main Differences Between Finish Nails and Brad Nails?

What Are The Main Differences Between Finish Nails and Brad Nails?

When you need to choose the appropriate finish nails for your work, the first and the most important thing you should know is about each type that is available. In case you are not experienced too much in handling home improvement job, you might be amazed at the different choices that you have. Although all types of finish nails seem similar, using the wrong types of nails can actually ruin the entire project. There are many hardware stores that sell various kinds of finish nails and you can choose the most suitable one from them.

Difference between Finish Nails and Brad Nails:

There is a basic difference between finish nails and other types of nails, for e.g. brad nails. Both these two types of nails are used in carpentry and are driven into the surface of wood materials using nail guns or hammers. Finish nails are mostly used in carpentry, where the carpenters work on doors, casings, moldings, cabinets, storage wood containers etc where the finish or detail is important.

The main difference between brad nails and finish nails is that the brad nails have flat heads that is visible on the wood, while the finish nails have heads that are not visible on the wood. You can also paint over the heads of finish nails to blend in. Finish nails are actually driven more strongly so that their heads are sunk or submerged into the wood in order to hide them from being visible.

Detailed Carpentry Work:

While brad nails are mostly used in carpentry work to fix wood in place as well as to hold two pieces together, finish nails are mainly used as the final nails that can be driven on a detailed carpentry work. Since the finish nails are headless, they can provide the best result when using on detailed and fine carpentry projects.

Image result for What Are The Main Differences Between Finish Nails and Brad Nails?

Corner Spots and Central Areas:

In most cases, professional carpenters prefer to use good quality finish nails for securing corners or near the corners of the wood. This is because the other types of nails can actually split the wood or can damage the corners entirely. The main reason of this is that the brad nails have blunt ends. However, the finish nails have more sharp and pointed ends. As a result, it is easier to drive finish nails on corners of the wood and central areas. This protects the corner spots from splitting.

Bigger Projects:

Carpenters often classify their projects depending on its kind and size. Just because brad nails and finish nails differ in lengths and strengths, it is good to use brad nails in small projects like joining plywood together or creating a small wood work. On the other hand, if you have bigger projects where you need to fix wardrobes or dressers or even when you need to work on outdoor woodwork, you should use finish nails as they are likely to provide you with the best results.

Also, in some cases brad nails are used in soft wood since these nails are thinner. However, finish nails are bet for using on harder wood as they are stronger than the brad nails.